Grain Valley 18-Gauge Wire Upgrade for SDF-100A or SDF-CTRegular price $50.99 Save $-50.99
Wire Upgrade for SDF-100A or SDF-CT
|UPC:||Does not apply|
|Country/Region of Manufacture:||United States|
18-Gauge Wire Upgrade for SDF-100A or SDF-CT
Upgrade your SportDOG containment system to include 1000' of GVDS 18-gauge wire With this upgrade, we remove the 2 standard rolls of wire (500 feet each) that come packaged with your containment system and replace it with one 1000-foot roll of upgraded GVDS 18-gauge wire.Â
Not only is the wire upgraded to 18-gauge, but this single roll of wire requires fewer splices.
Manufactured by: Grain Valley
How To Install An Invisible Dog Fence
Electronic pet fences can, without a doubt, come in handy for pet owners who would like to either train their dogs or ensure that they donâ€™t leave the safe perimeter of their homes. The system is composed of a transmitter and the actual fence, although there are several variants to give some thought to these days, and weâ€™ll do our best at detailing them below.Â
A new electronic dog fence establishes a barrier thatâ€™s invisible. Your dog wonâ€™t be able to visualize the boundaries he or she isnâ€™t supposed to cross, but the pet will feel a stimulus depending on the electronic collar that the fence needs to be associated with. In terms of collars, you can opt for those that do deliver electronic shocks, or you can go for the milder and more humane alternative, a model that only delivers vibrations and sounds.Â
Electronic containment is not possible under certain circumstances. If your dog has any health problems, particularly those which involve neurological disorders, we strongly advise you to utilize other types of containment methods. It wouldnâ€™t be a bad idea to have a talk with a vet before deciding on a particular one.
If youâ€™ve decided to purchase an invisible dog fence that actually comes with a wire, you need to know how much you have at your disposal. Typical systems usually come with about 500 feet of wire. The first thing you must do is plot your yard so as to know where you are going to install the fence. Before burying the wires, it is a good idea to test them to ensure that they are working properly. It would be inconvenient to have to dig them up and fix them if theyâ€™re malfunctioning.Â
Some other basics you ought to bear in mind range from the fact that you should not place your transmitter in a shed or barn to the fact that running the wire along with television cables or near satellite dishes is bad.Â
As for the installation per se, it really does depend on the model you have purchased. However, you need to use the graph paper plot you created and then lay the wire along your boundaries. Try to keep the wire as clean as possible and as far from other objects as you can.Â
Once youâ€™ve run the wire along with those limits, connect the ends of the wires and turn the whole system on. Following this procedure, you need to ensure that the collar is working and that it emits an audible alert as you got closer to the boundary.
After youâ€™re convinced that everything is up and running, what you need to do is cut a trench along your boundary. The depth can vary from 1 to 3 inches depending on the model youâ€™ve purchased. Sometimes, you may have to splice the wires to ensure that the yard gets enough. Always make sure to remain safe if you do this
Given that a variety of pet containment systems might be affected by power surges or lightning strikes, we suggest grounding the entirety of the system.